ТУТА ЕЩЕ ЧЕНИТЬ ВЛЕПИМ!
English
РусскийAuto IPsec tunnel on the router WRT-160
Submitted by Жрец_Храма on Thu, 25/08/2011 - 00:47
So I'm back:). Last time I promised to tell you how to automatically run at startup IPsecrouter, and in this short note, I'll do it.
In order to implement autostart tunnel, we need to create a startup init script for thisrecord to the file
/etc/init.d/racoon
The following text
#! /bin/sh /etc/rc.common
START=50 STOP=80 start() { echo "Starting racoon..." ifconfig eth1:0 b.b.b.b netmask 255.255.255.0 if ! ( lsmod | grep -E "^af_key" > /dev/null ); then insmod af_key;fi if ! ( lsmod | grep -E "^esp4" > /dev/null ); then insmod esp4;fi if ! ( lsmod | grep -E "^ah4" > /dev/null ); then insmod ah4;fi if ! ( lsmod | grep -E "^xfrm4_tunnel" > /dev/null ); then insmod xfrm4_tunnel;fi if ! ( lsmod | grep -E "^authenc" > /dev/null ); then insmod authenc;fi if ! ( lsmod | grep -E "^xfrm4_mode_tunnel" > /dev/null ) then insmod xfrm4_mode_tunnel;fi if ! ( test -d "/var/racoon" ); then mkdir /var/racoon;fi racoon sleep 2 setkey -f /etc/racoon/setkey.conf racoonctl vpn-connect A.A.A.A echo "Done." } stop() { echo "Stopping racoon..." racoonctl vpn-disconnect A.A.A.A pkill racoon echo "Done." } restart() { stop start }
Где A.A.A.A - the address of the server that connects to,
а b.b.b.b - gateway to your internal network
Well, almost everything is left only to "insert " this script
# /etc/init.d/racoon enable
And run it
# /etc/init.d/racoon start
Now everything;)
English
Add new comment